JET 708358K JWL-1442VSK 14-Inch Swing by 42-Inch between Centers 1 Horsepower Woodworking Lathe, 115/ 230-Volt 1 Phase

• Wood lathe with legs; variable speed (450-3,000 rpm)
• Provides 14-inch swing and 42-inch turning capacity; 4-inch ram travel on tailstock
• Bed and legs constructed of solid cast iron
• Includes lathe, tool rest, spur center, knockout bar, live center, spindle and indexing locks, wrench, legs
• 119 pounds; 1-year warranty

Serious woodworkers will love the durable, stable, heavy cast iron platform of the 14-by-42-inch Jet 1442 Lathe. The 1 HP, 115-volt, single phase, 8-speed drive motor can be used right out of the box without having to add expensive high voltage circuits. The large capacity, 42 inches between centers, allows for the turning of up to 14-inch pieces of heavy stock. In addition to the 4-inch ram travel, the movable head slides effortlessly along the full length of the bed locking in any position required by the user. The head can be rotated 180 degrees for turning bowls or blanks larger than 14 inches. The variable speed drive motor can be adjusted in 8 different positions to provide speeds ranging from 450 to 3000 RPM. The operator can easily set the proper speed whether roughing, general cutting, or sanding. There is also an adjustable tool rest, which can be extended for turning bowls. Weighing in at around 200 pounds, the Jet 1442 lathe will stay balanced and in place no matter how large the project. I'm sure you'll be amazed at just how quiet and how well balanced the 1442 is. --C. Dwight Barnett
Heavy-duty cast-iron lathe bed adds stability while limiting vibration during operation Indexing mechanism which allows for fast, efficient, fluting and veining operations Reeves drive pulley system allows quick variable speed changes from 450 to 3,000 RPM Headstock swivels 360?? with positive stops at 45?? and 90?? and may be positioned anywhere along the bed ways for maximum flexibility and user comfort Spindle has positive locking indexing in 10 degree increments for fast, efficient fluting and veining operations Built-in spindle locks let you remove or replace faceplates and chucks with ease Live center has a removable pin for boring through stock Cam-lock mechanisms allow adjustments of headstock, tailstock and tool rest base without having to use tools Hollow tailstock allows you to perform long hole boring for lamps and other vessels Special cast-in webbings in legs accept 2 x 4's or a 2 x 12 to construct a solid tool or sandbag shelf Amps 7.4/3.7 Brand Jet Centerline of Spindle to Floor (in.) 43-1/2 Distance Between Centers (in.) 42 Family Description 14" X 42" WOODWORKING LATHE Headstock Movement pivot 360 and slide Headstock Taper MT-2 Height 0 inch Hole Through Tailstock (in.) 3/8 Indexing Positions 36 Length 0 inch Model Number JWL-1442VSK Motor HP 1HP Motor Phase 1Ph Motor Voltage 115/230V Net Weight 356 pound Part Number 708358K Prewired 115V Ram Travel (in.) 4 Speeds (RPM) eight, 450-3000 Spindle Nose (in. x TPI) 1 x 8 Spindle Taper n.a. Swing Over Bed (in.) 14 Swing Over Tool Rest Base (in.) 10 Tailstock Taper MT-2 Width 0 inch